North America Looking for someone to help with cnc machining foam core

Results 1 to 5 of 5

Thread: Looking for someone to help with cnc machining foam core

  1. #1
    Registered
    Join Date
    Apr 2010
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Looking for someone to help with cnc machining foam core

    I'm around the Portland, Oregon area. I am hoping to meet up with someone who could do some cnc machining on form core for me. Yes, I'm looking for inexpensive price and good quality. If there is a better place to post this request please advise.

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Looking for someone to help with cnc machining foam core

    The better place to post might be in the RFQ section.

    But I'm in Sandy. Do you have drawings?

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Registered
    Join Date
    Apr 2010
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Looking for someone to help with cnc machining foam core

    Yes. I'm working in Rhino. I'm new with all of this. They are almost complete. There are two parts that need to be cnc machined. About 24" X 60" and about 1/2" in cutting depth. I wanted to 3d print portions of the completed part to see if it will work but from what I have learned its slightly larger than what parts can be made through 3d printing at this time. There may be larger 3d printer available but then costs of part jumps. Sandy is not to far. What do I need to send your direction to get you thoughts? and how do I do this other than posting the drawings on this post?



  4. #4
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Looking for someone to help with cnc machining foam core

    I sent a PM to you

    Jim Dawson
    Sandy, Oregon, USA


  5. #5
    Member awerby's Avatar
    Join Date
    Apr 2004
    Posts
    5728
    Downloads
    0
    Uploads
    0

    Default Re: Looking for someone to help with cnc machining foam core

    Are you talking about the kind of board that's paper with some EPS foam inside? I'd think that would machine rather poorly; getting through the paper cleanly would be difficult. Unless there are 3D features that are essential, this might be something best done with a laser cutter.

    [FONT=Verdana]Andrew Werby[/FONT]
    [URL="http://www.computersculpture.com/"]Website[/URL]


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for someone to help with cnc machining foam core

Looking for someone to help with cnc machining foam core