Regarding CNC Faunac 3T controller

[atulyelnurkar]

Hi all, I Atul Yelnurkar from India working on Moriseikie 3T faunac controller,Recently i am facing servo alarm VARDY OFF (2).Spindle drive is ok, X&Z axis Drive also ok.As soon as Machine control is ON VARDY OFF servo alaram is coming . Please suggest the remedies.Thanks

Similar Threads:

• New Machine Build- Arduino 2560 + Mach3 Controller + TB6560 4 Axis 3.5A Stepper Driver Board Controller
• New Product- Stand Alone Plasma Torch Height Controller (Kyndill Controller)
• Gecko 6 Axis Motion Controller (The Most Advanced Controller Available)
• DIY Controller laser Arduino Vs Controller general (mach3)
• Thinking of Converting my Mill's Anilam Controller to a Larken Based Controller..

[Normanmoyse]

Hi all, I Atul Yelnurkar from India working on Moriseikie 3T faunac controller,Recently i am facing servo alarm VARDY OFF (2).Spindle drive is ok, X&Z axis Drive also ok.As soon as Machine control is ON VARDY OFF servo alaram is coming . Please suggest the remedies.Thanks

Hi Atul
Had same problem due to parameters that changed. Please check parameters

[Normanmoyse]

Had same problem Check machine parameters. They sometimes
go corrupt.

[atulyelnurkar]

Had same problem Check machine parameters. They sometimes
go corrupt.

Parameters are ok, its small problem, contactor had problem with Z axis corrected now ok