changing software in laser

Results 1 to 4 of 4

Thread: changing software in laser

  1. #1
    Member
    Join Date
    Dec 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default changing software in laser

    So I bought a used laser and it currently has laser cut 5.1 installed with it, is it possible to switch it to RD works? I would like RD works because that is what I have currently on my other lasers so it would be less of a learning curve with it.

    Similar Threads:


  2. #2
    Registered
    Join Date
    May 2010
    Location
    United States
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default Re: changing software in laser

    Do you the part number to the main control board in your machine?

    KL-4530 CNC, KL-6060, 5 3D printers, CNC Fusion Converted LMS Milling Machine, 60w Laser Cutter


  3. #3
    Member
    Join Date
    Dec 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Sockles View Post
    Do you the part number to the main control board in your machine?
    I can find out, I'll post it later for sure



  4. #4
    Member
    Join Date
    Dec 2015
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: changing software in laser

    Quote Originally Posted by drjkl View Post
    I can find out, I'll post it later for sure
    The controller is MPC6535



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

changing software in laser

changing software in laser