I use Vortex 4200 series bits. https://www.vortextool.com/index.cfm...6EC22F4E93929D
With a 1/4" bit, I usually cut at 350-400ipm, 17,000 rpm.
I have began cutting .50" solid surface material and was looking for guidance in choosing the proper bits for making signs, engraving and inlay carving. Can you help in suggesting the at what cut speed would be best for this material.
Similar Threads:
I use Vortex 4200 series bits. https://www.vortextool.com/index.cfm...6EC22F4E93929D
With a 1/4" bit, I usually cut at 350-400ipm, 17,000 rpm.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)