Hi everyone thanks for reading this I am new to this forum I have just purchased my first rotor from China LOL. I am having problems setting it up the problem I'm having is I cannot get NCstudio to work . I am also using JD paint 5.5 trouble with the NCstudio it loads on successfully to the PC but when I press run a garbled message just comes on the screen some sort of error not even in Chinese not sure what it means . I have installed the card into the PC slot and loaded the software but same error comes up whether card is in the PC or not any ideas would be greatly appreciated thanks Phil. I am using Windows 7 32 bit which is what the software requires apparently .

Similar Threads: