I am new to the forum and looking forward to learning.

I am a hobbyist but have been building stuff for the last 25 years or so. I own several welders and a plasma cutter and bought a Grizzly G0516 a month or so ago and already wanting to convert it to CNC.

Will looking on info on how to do that I became fascinated with the CNC router and decided to build one of these too haha. I have purchased nearly everything I need to build a 4' x 4' table. I have five 420oz stepper motors, a uc300-5LPT motion controller, a 2.2kw Chinese Spindle.

I still need to buy a couple things like the VFD and some odds and ends but very excited to start making things.