- RENISHAW HPMA
-
Registered
RENISHAW HPMA
Hello guys,
i have a CNC TNC-210DST and he has a tool setter HPMA. The problem is that when i give commands M57 or M56 , he returns a error number 2016 TOOL SETTER SENSOR ERROR. I checked the wires that make communications between the HPMA and TSI3 and all seems to be fine.
Please help me!
Similar Threads:
-
-
Registered
Re: RENISHAW HPMA
make sure the rp3 that holds the stylus is in the tool arm correctly, the status light should be green.
- RENISHAW HPMA
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules