Hello all, I am new here and just getting started in this stuff. I recently acquired a gantry arm that I would like to retrofit to work on a hobby 4'x5' plasma table and it came with a couple motors that I would like to reuse. They are 169VDC Pittman Ametek N2344A070-R7's. Will these work for the X and Y axis and if so, what controller can I use? Also is it worth the extra time a material to incorporate water into the table? Any help would be appreciated.
Similar Threads:
- Mach 3 5056 drivers Nemaha 23 motors. C20 BOB ..Issues tuning motors.. any help is t
- 3 Ametek motors with encoders * if you want these motors, you MUST bid on E Bay - No Longer Available
- servo motors or stepper motors for ATC machine
- RESOLVED! Mach3 MaxNC enabled = 1/4 speed motors , Disabled = no running motors.
- Just IN- Provide controllers,drives,servo motors,stepper motors,electronic parts from China