Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)

Results 1 to 1 of 1

Thread: Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United Kingdom
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)

    Hi

    The problem i am having is that we want to upgrade the machine to Windows XP in order to run Mach3. The board that this machine has is a GSM-LCB3. It is currently booting to a floppy disk containing some form of DOS. I was just wandering if there is a way that i can get my XP machine to talk to this board? I have attached some pictures of the machine

    Thank You

    Jay

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)-dsc_0694-jpg   Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)-dsc_0695-jpg   Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)-dsc_0696-jpg   Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)-dsc_0698-jpg  

    Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)-dsc_0697-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)

Hi, I could do with some help/advice regarding a Denford CNC Machine (Mirac 1993)