Newbie questions - Aspire + Fusion 360

[JGDesigns]

Hi everybody here is the problem I am having Im trying to cut HDPE for the first time I id my design on Fusion 360 then exported it to Aspire to do my toolpaths. But when I run the preview it shows me that im cutting the edges. Ive attached a link to video for better explanation.

My Setup:
Shark Black Diamond Router
Fusion 360
Aspire 4.5
https://www.dropbox.com/s/nbuevlwzex...85556.mp4?dl=0


Similar Threads:

• Newbie- Newbie Fusion 360 Question
• CURSOS DE SOLIDWORKS, FUSION 360, ASPIRE Y ROUTERS CNC
• Fusion 360 and general chamfer questions
• X2 Conversion using the CNC-Fusion kit #4 - Four quick questions
• CNC Fusion kit questions

[daniellyall]

Why not use the fusion cam it is better than vectrics.

A file to look at would be better than a vid

[aarggh]

Edit:

Simply do a profile path machine job, set either inside, on, or outside along the vectors, which would be vastly more efficient than doing it a as a 3D finish machining.

cheers, Ian

[JGDesigns]

Why not use the fusion cam it is better than vectrics.

A file to look at would be better than a vid

an aspire file or fusion 360 file?

[ger21]

If your part consists of all 2D machining, you don't want to bring a 3D model into Aspire. In Aspire, you only need to draw three rectangles and use a pocket toolpath.
If you want to create toolpaths for 3D models, then do it all in Fusion 360.