Need Help! Headman T55 ( If this is not the right zone to post it, please move it) :)


Results 1 to 2 of 2

Thread: Headman T55 ( If this is not the right zone to post it, please move it) :)

  1. #1
    Registered
    Join Date
    Dec 2012
    Location
    México
    Posts
    8
    Downloads
    0
    Uploads
    0

    Red face Headman T55 ( If this is not the right zone to post it, please move it) :)

    Hello a Todos.!

    I need your help with these Chinese lathes, does anybody know or have experiences with they? I want to know if they are good lathes or not, I want to perform pins in stainless steel, i.e. a typical piece could be 5 mm external diameter, 12 mm length and M3 internal threaded., for another kind of pieces the maximum tolerances could be hundredths of millimeters as maximum and the raw materials could be steel 1045 or 4140.

    Regards,

    CAZ

    Similar Threads:


  2. #2
    Registered
    Join Date
    Dec 2012
    Location
    México
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: Headman T55 ( If this is not the right zone to post it, please move it) :)

    alo!

    Does anybody has a comment about it? please give me your feedback.

    Regards,

    CAZ



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Headman T55 ( If this is not the right zone to post it, please move it) :)

Headman T55 ( If this is not the right zone to post it, please move it) :)