Results 1 to 2 of 2

Thread: Upgrade Technologies GT27 Wiring Diag.

  1. #1
    Registered
    Join Date
    Oct 2006
    Location
    USA
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Upgrade Technologies GT27 Wiring Diag.

    I'm trying to locate drawings and maybe bill of materials/parts list for an Upgrade Technologies Compact GT27 gang lathe. Dr. Google referred me to a group supporting these, and they said no problem, for a small fee. I said Ok, they said they needed to put together an invoice, and then all communication stopped. So, hoping for a private or at least reliable connection.

    PS This one has the Fanuc controller, if it matters.

    Similar Threads:
    Last edited by 123CNC; 09-22-2008 at 07:02 PM. Reason: additional info


  2. #2
    Registered
    Join Date
    Mar 2004
    Location
    USA
    Posts
    559
    Downloads
    0
    Uploads
    0

    Default

    I think Dynamic CNC or Dynamic Machine (or some, thing very close to that) refurbs and sells these machines, so you might try them. They're in California.

    Cheers,
    -Neil.


    Quote Originally Posted by 123CNC View Post
    I'm trying to locate drawings and maybe bill of materials/parts list for an Upgrade Technologies Compact GT27 gang lathe. Dr. Google referred me to a group supporting these, and they said no problem, for a small fee. I said Ok, they said they needed to put together an invoice, and then all communication stopped. So, hoping for a private or at least reliable connection.

    PS This one has the Fanuc controller, if it matters.




Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed