3dprintforums logo

CNCzone Network:  RFQwork :: 3Dprintforums :: Welderzone :: Google+ :: Our Facebook :: Twitter :: SiteMap



Results 1 to 5 of 5

Thread: Looking for metric module gear cutters

  1. #1
    Registered
    Join Date
    Aug 2008
    Location
    United States
    Posts
    45
    Downloads
    0
    Uploads
    0
    Rep Power
    0

    Looking for metric module gear cutters

    I plan to build a tall case regulator clock and will be cutting the gears. Does anyone have a source for 0.8 module gear cutters? Any help is appreciated. Thanks.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Age
    73
    Posts
    2672
    Downloads
    0
    Uploads
    0
    Rep Power
    11
    "Google" Ash gear & supply.

    Dick Z

    DZASTR


  3. #3
    Registered
    Join Date
    Dec 2006
    Location
    USA
    Posts
    84
    Downloads
    0
    Uploads
    0
    Rep Power
    8
    I assume you will be cutting epicyloidal teeth and not involute for the clock. If so, PP Thornton sells them but their in England. I've purchase from them without problem though. They also have pinion cutters and escape cutters which is nice if you don't want to make fly cutters.

    http://www.ppthornton.com/

    You may also want to broach this question on the NAWCC forum at http://mb.nawcc.org/.

    Ash and some other may have them but more than likely they will be involute or you will have to have a custom cutter made. Can't hurt to ask them though.

    Best Regards.

    Carl



  4. #4


  5. #5
    Registered
    Join Date
    Aug 2008
    Location
    United States
    Posts
    45
    Downloads
    0
    Uploads
    0
    Rep Power
    0
    I appreciate the suggestions. Thanks.



Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed