Need Warm-Up Program for my VMC

[CNC Viking]

Hi,

I need a good varm-up program for my VMC.

If anyone has such a program, please post it here. Don't know suitable duration, but guess 20-30 min. is ballpark.


My travels, feed rates, speeds etc:


X= 800mm
Y= 450mm
Z= 500mm

Spindle speed= 50 - 6000 rpm.

Feed rates, machining = 1-10 000mm/min
Rapid X, Y= max 18 000mm/min
Rapid Z= max 15 000mm/min

Control: Mitsubishi Meldas 520 AMR 1996

Similar Threads:

• HAAS warm up program
• Spindle Warm Up Program
• warm up program
• Warm up program?
• Warm-up program

[machinehop5]

Hi,

Maybe you can use something in this pdf File for Fadal machines. Look for the Workout Programs Starts at Page 9. Edit as needed for you machine.

Good Luck on your Mission.
DJ
Omaha,NE

[CNC Viking]

Thanks DJ,

I will analyse it and check if there are any G- and M-codes that I don't have in my machine, and that one is inches, right? My machine is set for mm (we do that on this side of the pond). It will take a little while, but your program certainly serves as a basis to create my own version.