Need Help! Help with Double lead Thread


Results 1 to 1 of 1

Thread: Help with Double lead Thread

  1. #1
    Registered
    Join Date
    Mar 2011
    Location
    usa
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Help with Double lead Thread

    Can I cut a double lead 2-56 UNC 2b thread with a thread mill

    Similar Threads:


  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: Help with Double lead Thread

    yep, should be possible ! you need a helix soubroutine, that begins at a random angle, or shift Z kindly !

    ps : if you use a custom toolpath, that reduces tool stress when entering the material, than you will have to rotate also this type of operation

    we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...


  3. #3
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default

    another way 2 do it is by using a temporary coordinate system : declare the program origin in the center of the bore and apply a rotation of 180 degrees ☺



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help with Double lead Thread

Help with Double lead Thread