Need help


Results 1 to 3 of 3

Thread: Need help

  1. #1
    Member
    Join Date
    Apr 2013
    Location
    england
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Need help

    Could anyone help me convert this back panel of this bench to a useable dxf file please not to worried about the overall size dims but standard bench size would do.also cutting on plasma machine with a 4mm kerf so parts would have to be spaced accordingly . Many thanks.

    Attached Thumbnails Attached Thumbnails Need help-c71faed3-1e29-4968-9cb3-945c5f892207-jpg  
    Last edited by ray6171; 12-20-2017 at 06:25 AM.


  2. #2
    Member
    Join Date
    Apr 2013
    Location
    england
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by ray6171 View Post
    Could anyone help me convert this back panel of this bench to a useable dxf file please not to worried about the overall size dims but standard bench size would do.also cutting on plasma machine with a 4mm kerf so parts would have to be spaced accordingly . Many thanks.
    Anyone



  3. #3
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Need help

    In order to convert that, you would have to have a much better picture. That picture is not really usable.

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help

Need help