ok group i am having trouble with a bead knurl after searching the internet and talking to a few guy i know i am turning to you.
I am working with 360 brass a .925" dia. running a spindle speed of 750 rpm and a feed of .0125 per rev on a haas sl20. The issue I am having is the beads are not fully fully closing or one side is breaking off leaving a deformed bead. Any help would be appreciated. Thank you in advance
Similar Threads:
Can you do some photosok group i am having trouble with a bead knurl after searching the internet and talking to a few guy i know i am turning to you.
I am working with 360 brass a .925" dia. running a spindle speed of 750 rpm and a feed of .0125 per rev on a haas sl20. The issue I am having is the beads are not fully fully closing or one side is breaking off leaving a deformed bead. Any help would be appreciated. Thank you in advance
Mactec54