Any one got a picture of camera that would look good on a sign for a Photographer?
This one is not numbered at all. But it is a 360 degree with 5 degree set offs and 10 degree set offs and 45 degree set offs and 90 degree set offs.
What is possible? What you will!
I milled the F 15 owing to your assistance found now. Does someone have perhaps still DXF of F 15/F 117 or Apachi helicopters? Refuge
Horst
Thanks for the 360 dxf, that could actually come in handy down the road-
Dave->..
Anyone have a dxf or(?) of the front of a doghouse? I don't want plans for doghouse but the front of one that i can make into a plaque and have the name of the dog above the door. Thanks
Concerning art, is anyone interested in helping me get started with art. Maybe even suggest a learning program. Or if you are the chatty type want to privately correspond with a simple design? If so I would love to.
Then, knowing me, I will become obsessive and have all kinds of pictures in art.
i think im happy with this will have to see.
Thanks guys, I'm actually going to use both. I'll put the dog in the house.
Here is a helicopter, I think someone posted this on here earlier, I just added the fan engines and here is a silhouette of an F-15.
Horst
I don't have an F117, but maybe this F16 top view will do.
New DXF File ---> Design 33
.
Free DXF - vectorink.com
This is a sail I make for wind chimes. The holes are to mirror it and engrave the other side. Also makes a nice HOT pad. I use DuPont Corian. Take different color spray paints and spray on it and while still wet wipe off with a rag dampened with paint thinner. Without the paint the engraving doesn't show up much. The picture was a test piece of scrap.
Jerry
New DXF File ---> Design 34
.
Free DXF - vectorink.com
hey guys, I was given this picture today and asked to engrave it, I wanted to see if yall could help me out by converting it to dxf for me, my friend needs it by this afternoon otherwise I would try and draw it by hand.. thanks in advance guys..
Wooderson,
See if this will work for you
Nice job wood chuck
49 and still learning
that will work great, thanks gwittlock, you saved me a lot of time.. what program do you use to do that??