Share Your Files Part or Art

[jalessi]

Bluegillman,

Have you noticed many of the CNC Zone members do not contribute back to the community even when asked to post an image of there finished project?

See attached files for the conversion you requested.

Jeff...

[Larry83301]

Bluegillman,

Have you noticed many of the CNC Zone members do not contribute back to the community even when asked to post an image of there finished project?

See attached files for the conversion you requested.

Jeff...

I just look and see what kind of posts they have added to the forum and go from there. If they have posted some files that they made I'll help them if not then I just go on to the next post on the board.


Larry

[Bluegillman]

I will when I get the machine open and will post a pic..some dxf files do work some just wont let my machine read it or it took up too much space...

[Bluegillman]

This is one that I made while back....

[Bluegillman]

https://mail.aol.com/webmail/getPart...s=IMG_1105.JPG

Making belt but not done yet....

(sorry this one didn't do...)

[jalessi]

This is one that I made while back....

Very nice work!

[Bluegillman]

I couldn't turn the pic....sorry....

[jalessi]

I couldn't turn the pic....sorry....

No worries,fixed.

[Bluegillman]

was working on this, making belt not done yet....little work to do then will post another pic...
that alum part is 1.85X3.00...so I was trying to fit the deer skull on it but it showed 12.00"....

[Bigbird48]

What is it that people post sideways pictures gessh turn the thing around the right way before posting is that to hard

This is one that I made while back....

[tjstamp]

just wondering if this can be a dxf.

[Bigbird48]

yes it can but a lot of work by hand.maybe a good program can do it not sure

[ryke]

My program is having problems converting these to a good dxf, would anyone else like to try. Please and thanks

[Bigbird48]

these are pretty easy to do by hand trace give it a try

[Hockeyguyjohn]

Download a completely free program called Inkscape. It is a poor mans Adobe Illustrator.

See this video to make a dxf from your photo.

[SignTorch]

My program is having problems converting these to a good dxf, would anyone else like to try. Please and thanks

the deer and trees are some of my designs, at signtorch.com - (c) -
Deer Family 6 = : SignTorch, Turning images into vector cut paths.
Tree 354 = : SignTorch, Turning images into vector cut paths.
Sawblade 008 = : SignTorch, Turning images into vector cut paths.

[BrianB84]

BrianB84,

The majority of the dxf's members ask for are not off the shelf (including these), they are custom created for the individual that needs it.
See attached files for the artwork you requested.

Please make sure to post an image of your finished project.

Jeff...

I cut these out for my nephews. Done them in gloss mdf, told the parents to spray paint them and wipe off the overspray with white spirits. Saves time painting them with a small brush.

They turned out brilliantly and kids were thrilled. Thanks a million.

[wojtas]

Hi,


My lanterns. What do you think?









More on facebook

https://www.facebook.com/DW-1257580557655561/

[Bigbird48]

Very nice awesome job

[tjstamp]

I posted but did not go right.