Share Your Files Part or Art

[pc101mn]

can some one convert these image


for me thanks

[jalessi]

Ken,

Your work is impeccable, what a awesome machine too!

Jeff...

Hi Jeff,
I fixed my machine and cut the badge out.
Here's a photo of it painted,
Attachment 249522

The box I made for it to go on,
Attachment 249524

and the box on the engine,
Attachment 249526

I just like to thank you again for your fine work
converting my photo.

Regards
Ken

[jalessi]

Pc101mn,

Please post a image of the finished project,

Jeff...

can some one convert these image


for me thanks

[LaserGod]

Adam,

The "Trail Rated" logo was extremely time consuming, three hours to be precise.

Apply it to my account,

Jeff...

Thanks ALOT! you made my bosses very happy! i will post pics of the finished products.

Adam

[trungnguyenhp]

help me file dxf
Thank

[luiscarneirorm]

Someone have a DXF file to make a support for a smartphone? In my case it's for a "one plus one".

[pprecisQC]

Hi guys,

This is my first post. I noticed some awesome dxf conversions here and I was wondering if someone could convert these for me.


They're going to be laser marked on a retirement gift.
Thanks,
--Nikki

[LEARN]

anyone on right now that can convert a jpg to dxf ? trying to beat another guy to a good file

[jalessi]

I am, start your engines!

anyone on right now that can convert a jpg to dxf ? trying to beat another guy to a good file

Jeff...

[ssscottes]

Can someone convert this to a dxf file for engraving Thanks

[jalessi]

Nikki,

Welcome to the Zone.

A lot of the work you see in these threads are not conversions, they are complete redesigns.

I started working up a new design based upon the art you posted.

Semper Fi

Jeff...

Hi guys,

This is my first post. I noticed some awesome dxf conversions here and I was wondering if someone could convert these for me.


They're going to be laser marked on a retirement gift.
Thanks,
--Nikki

[LEARN]

Thanks guys . I was able to get part of the logo complete while my coworker got the font made . I was trying to get it done on the free online things. But would not work. But thanks again

[LaserGod]

Hi Guys! I have a little project for a local boy with cancer. i was wondering if anyone happens to have a DXF file of Jeff Gordons #24 logo with his name on it not the signature just his name in block letters. i have tried looking around on the net but i cant find a good enough pic to play with. Any help would be much appreciated!

Thank You, Adam

[Larry83301]

Hi Guys! I have a little project for a local boy with cancer. i was wondering if anyone happens to have a DXF file of Jeff Gordons #24 logo with his name on it not the signature just his name in block letters. i have tried looking around on the net but i cant find a good enough pic to play with. Any help would be much appreciated!

Thank You, Adam

Could you give us a hint as to which logo you are looking for, square, round, pennant, with car or not???
Take a look here and post an idea, OK. https://www.google.com/search?q=Jeff...ed=0CAYQ_AUoAQ

Larry

[LaserGod]

Could you give us a hint as to which logo you are looking for, square, round, pennant, with car or not???
Take a look here and post an idea, OK. https://www.google.com/search?q=Jeff...ed=0CAYQ_AUoAQ

Larry

Round or square no car I will be laser cutting it so I Dont think the car would come out to well.

Thanks Adam

[pprecisQC]

.

[pprecisQC]

A lot of the work you see in these threads are not conversions, they are complete redesigns.

Jeff, thank you for the DXF. It looks great.
How long did it take you to create it? Also, what do you use for your "conversions"?
I run the laser marker at work and we've been getting lots of requests for logos and complicated designs. I'm trying to find the best software or approach to designing JPEG into DXF files. Currently we're using Mastercam's Ras2Vec function, but there is a lot of cleanup with imported graphics. I downloaded Inkscape, but I'm not sure how to use it. Any help would be greatly appreciated.

Thanks again,

--Nikki

[LaserGod]

Could you give us a hint as to which logo you are looking for, square, round, pennant, with car or not???
Take a look here and post an idea, OK. https://www.google.com/search?q=Jeff...ed=0CAYQ_AUoAQ

Larry

[jalessi]

Nikki,

As you stated "there is a lot of cleanup required with imported graphics", I use seven separate software applications to generate a exceptional vector.

What I use depends on the quality (sharp, clean, at least 300 dpi) of the original artwork and if it contains shading or is dithered.

Using the best bitmap to vector conversion software such as Vector Magic is not successful all the time thats why they offer "Hand Tracing"

How It Works - Vector Magic

The .dxf I "CREATED" took several hours to complete. How long did it take you to finish boot camp?

Sometimes there is no free lunch!

Have a most awesome day,

Jeff...

Jeff, thank you for the DXF. It looks great.
How long did it take you to create it? Also, what do you use for your "conversions"?
I run the laser marker at work and we've been getting lots of requests for logos and complicated designs. I'm trying to find the best software or approach to designing JPEG into DXF files. Currently we're using Mastercam's Ras2Vec function, but there is a lot of cleanup with imported graphics. I downloaded Inkscape, but I'm not sure how to use it. Any help would be greatly appreciated.

Thanks again,

--Nikki

[prupp]

Can anyone do the m&p 15 logo from this pic, I have a gun case I would love to engrave it on
Thanks
Google Image Result for http://www.gunsholstersandgear.com/wordpress/wp-content/uploads/2012/02/Smith_Wesson_MP15_03.jpg