Share Your Files Part or Art


Page 1 of 586 12341151101501 ... LastLast
Results 1 to 20 of 11709

Thread: Share Your Files Part or Art

  1. #1
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default Share Your Files Part or Art

    Post any file you would share with us and just a brief description

    This is a clipper ship dxf

    Similar Threads:
    Last edited by lakeside; 04-08-2006 at 07:28 PM.


  2. #2
    Member
    Join Date
    Apr 2003
    Location
    Ohio, USA
    Posts
    1873
    Downloads
    1
    Uploads
    0

    Default

    21 TIMES

    I don't have any fun type files, but I will look to be sure.



  3. #3
    Registered
    Join Date
    Apr 2003
    Location
    Canada
    Posts
    159
    Downloads
    1
    Uploads
    0

    Default

    Here's a project you might be interested in.If I remember correctly it use a 1/16" bit on 1/8" MDF.

    Attached Files Attached Files
    Last edited by jimini; 04-08-2006 at 01:46 AM. Reason: Had to Zip the gcode file


  4. #4
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default

    today files I will post 2 aday but would like to se more upload Jimini you eagle is a nice file. The file below are of fish also will remove files once a week to keep stored data down on my system

    Last edited by lakeside; 04-08-2006 at 09:43 AM.


  5. #5
    Registered mikegasman's Avatar
    Join Date
    Aug 2004
    Location
    canada
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Here’s a skull I used to test my machine when I finally got it running.
    I used a 1/8 ball end.

    Attached Files Attached Files


  6. #6
    Registered mikegasman's Avatar
    Join Date
    Aug 2004
    Location
    canada
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default

    Thank you for the skulls lakeside here’s a angel.

    Attached Files Attached Files


  7. #7
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Default

    Dragonfly flew away.

    Last edited by Weldtutor; 04-21-2006 at 09:44 AM.


  8. #8
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Default Fire Exchanged For Firearms

    Flames went out

    Last edited by Weldtutor; 04-21-2006 at 09:46 AM.


  9. #9
    Registered
    Join Date
    Mar 2004
    Location
    United States
    Posts
    1147
    Downloads
    0
    Uploads
    0

    Default

    i will see your dragon fly, and raise you a wild boar!



  10. #10
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Question What Boar???

    Quote Originally Posted by vacpress
    i will see your dragon fly, and raise you a wild boar!
    You may see the fly, but where is the boar?

    Maybe he's out looking for a "wild sow"?

    Nice fire you started here with this thread Lakeside. (The flames look good also!)



  11. #11
    Registered
    Join Date
    Mar 2006
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    hello,

    I am new to this site and had a question about these files. are these created with a cad software or is there a web site i could go to find more. Right now I am trying to use a raster to vector software so i can create a cad model of it. then i take my model file and laser cut it out of steel. But some times the the conversion doesn't always work out. have tried lots of different raster to vector softwares and haven't found one i like the best yet. Any info would be greatly appreciated.



  12. #12
    Registered
    Join Date
    Mar 2004
    Location
    United States
    Posts
    1147
    Downloads
    0
    Uploads
    0

    Default

    Ok. So, I havent really got a wild boar DXF... I am a wild bore..


    Get it?



  13. #13
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by racerx00
    hello,

    these created with a cad software best yet. Any info would be greatly .
    some a raised to vector and others a cad there are many software that can do this try as many demo first and you'll find one you like



  14. #14
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Wink ...............A Bore???

    Quote Originally Posted by vacpress
    I am a wild bore..
    Get it?
    I can't be sure about the wild part ........bore, OK I'll accept that!

    Last edited by Weldtutor; 04-21-2006 at 01:06 PM.


  15. #15
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default

    instead of a beer heres a cocktail



  16. #16
    Registered
    Join Date
    Mar 2004
    Location
    United States
    Posts
    1147
    Downloads
    0
    Uploads
    0

    Default

    Because I am at work, I could possibly contribute some copywritten or IP protected stuff..

    Weber Grill Logo anyone? How about the burner port cut-pattern for next years top of the line BBQ grill (12 valves!)

    Ok.. I suppose I shouldnt share such things...

    And for all interested, for doing 2D artwork, I love the Adobe Illustrator program. It is great if you just want to get your idea drawn...

    It makes 'quick work' of 2D stuff like this:




  17. #17
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default

    here a quick raise to vector of your poster vacpress



  18. #18
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Default Cocktail Hour!

    Quote Originally Posted by lakeside
    instead of a beer heres a cocktail
    I normally like lime on my cocktail with a well salted rim.

    My redneck barbeque is a grocery cart sitting over a bonfire.
    That Weber logo sure would look good wired to the side of it!

    Nice AI work Vacpress

    Last edited by Weldtutor; 04-21-2006 at 01:09 PM.


  19. #19
    Member
    Join Date
    Mar 2006
    Location
    Boston
    Posts
    1625
    Downloads
    0
    Uploads
    0

    Default

    rabbit for your garden



  20. #20
    Member Weldtutor's Avatar
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    1238
    Downloads
    0
    Uploads
    0

    Thumbs up Rapid Rabbit

    Quote Originally Posted by lakeside
    rabbit for your garden
    I like the rapid rabbit, not rabid is it?

    Maybe someone else can "Jump" in with some files.

    This thread is "Hopping" today!



Page 1 of 586 12341151101501 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Share Your Files    Part or Art

Share Your Files    Part or Art