Hi All
Does anyone have a DXF of a hammerhead shark .
Thanks
Free DXF - vectorink.com
Hi All
Does anyone have a DXF of a hammerhead shark .
Thanks
Hello all
i need to make a realistic copy of this gear
kinda like a 2ft set of gears that turn together
anybody know what this gear specification means and how i can get the
geometry to cut it?
Spline: DIN 5480 W35x2x30x16-9g
thanks guys
If you going to make this gear with a router post the gears dimensions as I have a program that'll not only create a dxf of the gear but will also make the code for Mach3.;
Hi, does anyone have or can make the peppa pig logo outline to cut out on a laser please.
as seen here http://www.ordertoys.co.uk/wp-conten...a_pig_logo.jpg
I am then going to engrave the rest of the logo onto the cutout.
Hope someone can help
Google images is a better place to find the image I think Peppa pig logo
Shaun111,
Maybe this will work.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Excellent. My little girl will love this. Thank you
Can anyone help Mick40 and I out with making this a dxf
I don't know if anybody has posted this before so here it is.
I made a plaque for a friend of mine who was a young ranger back in the 70's.
Ferny.
Just after Christmas my son was walking our sweet tempered Black Lab when a errant loose Pit Bull made an attack run at my son. Our dog interceded and for her trouble was nearly eaten alive.
After $1000 worth of vet bills and two months of messy home nurturing the dog will be scared but otherwise fine.
I was taken by the skill, concern and tenderness shown by the vet and the staff so to say thanks I used my DIY router and Aspire to make some wall hangings for them.
Switcher, I would like to thank you for a couple of DXF files that I used from your Blog. I was doing something a little different for a photo group that I belong to, the results were quite interesting.
Here are a couple of the images.
For more pictures and a bit more detail on the setup
http://robinwainwright.wordpress.com
Last edited by rwaudio; 02-22-2010 at 04:13 PM. Reason: more info
Anybody gotta Wahoo board???