Thanks a bunch !!!! That gives me a great deal to start with...
Switcher
the material is just .05 thick aircraft 2024 with a good coating of red Dykem
dropped on my vacum chuck and using a very small drill we etched the math about .002 deep
___________________________
Adapt , Improvise , Overcome
Thanks a bunch !!!! That gives me a great deal to start with...
Last edited by Switcher; 11-17-2009 at 12:39 PM.
Free DXF - vectorink.com
does anyone have plans to build a "CNC TOOL HOLDER CART" ????
Switcher
the alum is a special smooth grade, that helps
thanks
New DXF File ---> DXF 400
.
Free DXF - vectorink.com
New DXF File ---> DXF 401
.
Last edited by Switcher; 11-18-2009 at 10:49 PM.
Free DXF - vectorink.com
New DXF File ---> DXF 402
.
Free DXF - vectorink.com
Thanks, WT
Another butterfly.
New DXF File ---> DXF 403
.
Free DXF - vectorink.com
I am in need of a sea turtle. I really hope someone has one. Thanks to all that con tribute to this awesome site!!!!
To Anyone interested enough to visit...
November updates are now online at http://cnc4free.org
Images don't seem to want to upload for some reason... will add later...
Links page also updated
Last edited by yohudi; 11-19-2009 at 07:43 PM.
What one man can do another man can do..
BitMaps to Models, 3D2Relief, tutorials and FREE CNC Software http://cnc4free.org
I thought I would throw this into the mix also. There is a lot of neat stuff here at this site (www.craftsmanspace.com )
did any body have an updated software for the bridgeport mill EZ-TRACK BOSS DX/32 V2.30/4.54
Nice site lewis, thanks for the link!
Dan
Can anybody help me with a POW-MIA dxf? I've been asked to help some folks.
Thanks
Dave