Here is Part 2, of the Halftone video.
http://www.mediafire.com/?vn2x2e9ji4t
The videos don't have audio, If you have any ?'s, just post them.
I didn't use youtube because of the youtube low quality, the screencast get all blurry.
mlind,
I made a video, that shows how I made the Inkscape halftones.
The video is broken into 2 parts, to keep the file size small
Here is Part 1:
http://www.mediafire.com/?c200yim3lpz
I'm uploading Part 2, now.
I tried to post here on cnczone, but the zip files wouldn't upload?
.
Free DXF - vectorink.com
Here is Part 2, of the Halftone video.
http://www.mediafire.com/?vn2x2e9ji4t
The videos don't have audio, If you have any ?'s, just post them.
I didn't use youtube because of the youtube low quality, the screencast get all blurry.
Free DXF - vectorink.com
Here is a John Wayne photo, converted to a Halftone Image in Inkscape.
I used circles, as the clone object.
Free DXF - vectorink.com
Could someone do this in a .dxf please. Thanks in advance. Mike
Thanks, landdesign.
Necessity is the mother of all invention (unknown)
My club home page www.lhmac.org
rcpilot82,
Looks great!
Can't wait to see it painted.
Last edited by Switcher; 09-08-2009 at 10:23 AM.
Free DXF - vectorink.com
Made for a friend for his birthday.
What is possible? What you will!
Anyone have a use for this? Threw it together this morning.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
That looks great rcpilot82! The felt on the rockers was a good idea too.
I had made a couple for a local hardwood supplier out of cherry, maple and walnut that they displayed in their lobby. Didn't think to get pictures of them at the time.
I also want to say thanks to Switcher and all of you here who take the time to post files and share knowledge. What a great forum!
Skip
Hi
A client of mine wants a clamshell design similar to the one seen in niches in a sitting room that is semi-circular in shape. The room is approx 30 feet along the back wall with a 15 feet radius semi- circle. Does anyone have a dxf, or any ideas about how to go about this project.
Regards
Mick
Hi
A client of mine wants a clamshell design similar to the one seen in niches in a sitting room that is semi-circular in shape. The room is approx 30 feet along the back wall with a 15 feet radius semi- circle. Does anyone have a dxf, or any ideas about how to go about this project.
Regards
Mick
What is the material?
I would think foam-board would work to your advantage, then a few skim coats of plaster.
Is something like this, what your looking for?
How deep is the working area?
Maybe some ideas here:
http://www.vectorart3d.com/store/
http://www.carve3d.com/
Free DXF - vectorink.com
This might get you started on the shell, it's a bit rough.
Free DXF - vectorink.com
Actual Pics of my hot dog roasting stick holder. .dxf's in Post #4429 above
Thanks again Switcher!
Ferny.