I imagine you mean the geckos shown in the attached photo. They are 22" long, cut from 16 Ga. mild steel.
Two with an oxidized finish are in an outdoor garden, & two more with the polished surface shown, are for decoration in my home.
As mentioned in the contest forum, this is "reverse procreation" since my machines electronic controls, that made the cuts, contain 3 Geckodrives.
(Great work on the 3D carvings shown in your project log.)
Try the attached file in CamBam to see if the shapes can be altered, & let me know.
This has been saved as a Dwg file not a DXF.
I found as you did, that the DXF save could not easily be altered, but these DWG files can be.
Thanks, WT
Thanks Weldtutor.. Geckos will really look good in their final locations... I really hurt when i loose that competion.....
Please post pictures when u put them into the right place..and also thanks for liking my woodwork... This all happen only with the help of persons like u who gave us details about their machines and guided us.. Salute to u Weld tutor
This one will make the pastor proud!
Been working on it for a little while.
It'll work as a cutout...just cutout the white area
Playing with Inkscape.
.
Free DXF - vectorink.com
This is a "Welcome" sign I made working with Inkscape.
1) The Font is "Stencil"
2) The design on the bottom is from a font/dingbat.
http://mydxf.blogspot.com/2008/11/design-113.html
.
Free DXF - vectorink.com
Jamf2, did you lasaer the plaques or did you paint the lines black?
Dan
It's oak mdf, cut with a 90 engraving bit, depth.7, surface top .75, clear coat, black coat, sand, clear coat, top coat.
They do make colored mdf but its just so expensive to buy and you have to buy it by the bunk. So a little more work involved. Made 30 of each and only took a couple of hours in the finishing.
Also my brother actually painted the T and colt logo. I do not have pictures of those yet.
What is possible? What you will!
That is nice to see.
I wish we got more of that.
I like the way you have put that to use...good job putting the final touches on that file!! They look good.
This site might interest you to look at sports items.
hey guys been wathing this site for a while now talk about some talents pretty cool stuff. I've been trying to get some christmas projects done and my nephew is really into transformers so I thought that I would try to cut out an autobot logo but haven't found anything good yet I'm running a tm3 plasma table and just starting to learn the ins and outs of cutting things any help would be appreiciatted thanks Dan
Check HERE for the autobot.
It might be what you are looking for.
This is what "Sancho" looks like when you come home from work early!!!
New DXF File ---> Design 114
.
Free DXF - vectorink.com
switcher and weldtutor you guys are awesome those will work out great i'll post some pictures when I finish it thanks again dan
I found a new font "Abilene", (well it's new to me ) looks kinda western.
I had to try it out with Inkscape.
.
Free DXF - vectorink.com