3dprintforums logo



Results 1 to 2 of 2

Thread: DUPLOMATIC TURRET

  1. #1
    Registered
    Join Date
    Jan 2009
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    DUPLOMATIC TURRET

    We have a DUPLOMATIC TURRET
    that needs parts or possible re-building.
    Macoser in Charlotte can't help us.

    MODEL BSV200 MID 80's
    12-0/12-110/60
    CODICE: 6420004
    MATR: 8402113

    Any recommendation would be greatly appreciated.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Oct 2006
    Location
    ireland
    Posts
    53
    Downloads
    0
    Uploads
    0
    I have a BSV 200 with a 12 station VDI disc on an MHP cnc lathe. The lathe developed expensive control and servo problems and has been lying in the back of the shop for 10 years.Turret should be OK as it was fitted new a short time before the other problems occured. Any intrest ? PM me
    Bert



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed