Need Help! Phenolic Table Patch

Results 1 to 3 of 3

Thread: Phenolic Table Patch

  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Phenolic Table Patch

    We recently had a fire on one of our machines. It burnt roughly a 2'x2' section of the phenolic matrix. We looked at replacing it but to buy the 52"x 63.5" x 2" thick was extremely expensive.

    I was wondering if we plane out the bad section and pour a resin in there, then re-machine the matrix grid. Does anyone have any suggestion on what type of resin would hold best to the phenolic?

    Thanks

    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Apr 2009
    Location
    USA
    Posts
    5189
    Downloads
    0
    Uploads
    0

    Default Re: Phenolic Table Patch

    You have a CNC, cut a nice pocket, and inlay a piece of phenolic, and then resurface the area! Done!



  3. #3
    Registered
    Join Date
    Dec 2014
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Re: Phenolic Table Patch

    Yeah, we ended up doing that on Monday. Worked great.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Phenolic Table Patch
Phenolic Table Patch