milling aluminium

Results 1 to 20 of 20

Thread: milling aluminium

  1. #1
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default milling aluminium

    Hello, i must evaluate cutting time for this operation ... mill has 3 teeth, other dimension attached

    If i would cut into steel, i would go 1500±300 rpm , 0.08 .. 0.12 mm/o

    How should i go into aluminium ? i have never milled aluminium ... so, just increase rpm 3..4 times ? please, i need some advice

    kindly !

    Similar Threads:


  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    Quote Originally Posted by A_Camera View Post
    I have no answer to give, other than that I would experiment. After all, what can go wrong? Fail or pass, either way I would learn.
    we all die in the end smarter, but kaput



  3. #3
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    Quote Originally Posted by A_Camera View Post
    Right. Some sooner than others, some smarter than others, but eventually only one thing is 100% sure in our lives, that is that there is an end to it, and then kaputt for everyone. In the meantime and until I start pushing up daisies, I'll keep on experimenting and learning.
    i believe in life after death



  4. #4
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    i read that humans are more scared of spiders ... than lights-out



  5. #5
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    Quote Originally Posted by Tkamsker View Post
    about the alu if you pm me an iges file i send you the gcode for alu and you give it a try or i ll do it on our machines for the sake of advertizing videos -

    Gesendet von iPad mit Tapatalk
    thank you ... this thread starts with an image with tool dimensions and material to cut ... please take a look

    do you think that tool dimension is ok ?



  6. #6
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    Quote Originally Posted by Tkamsker View Post
    I Know but You where asking for cutting Time
    material / section length is 880 mm



  7. #7
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: milling aluminium

    Quote Originally Posted by Tkamsker View Post
    c... but maybe we should continue about death spiders on the north pole
    but of course ... i will do trial runs, with different cutting specs ... about that story, we must go on, but wait for imagination to hit one of us



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

milling aluminium

milling aluminium