Results 1 to 2 of 2

Thread: Cutting in channel

  1. #1
    Registered
    Join Date
    Jul 2005
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Cutting in channel

    Hey i was just wondering i have a Mazak 1500w Champ,My boss needs me to cut a square shape in a extusion through one side and not the other is this possible and how.

    Thanks Rich

    Similar Threads:


  2. #2

    Default

    With the proper focus, the laser would have enough power to cut one side and not enough to cut the other. It depends upon how far apart the two faces are, as well as thickness of the face being cut.

    Hi-TecDesigns.com -- Automotive Lighting Systems


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed