Laser Controller


Results 1 to 7 of 7

Thread: Laser Controller

  1. #1
    Registered
    Join Date
    May 2007
    Location
    CHINA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Laser Controller



  2. #2
    Registered
    Join Date
    Apr 2007
    Location
    THAILAND
    Posts
    76
    Downloads
    0
    Uploads
    0

    Default Laser cutter

    It is produced from step-servo company. Right



  3. #3
    Registered
    Join Date
    May 2007
    Location
    CHINA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Yes, many lasers made in china apply it and the software lasercut5. I can use it to meet my requirement. But what I want to know as a trader is, to those non-Chinese, is this product friendly/easy to use?



  4. #4
    Member
    Join Date
    Jun 2006
    Location
    Canada
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default Mpc03

    Well, my MPC03 arrived defective, trying to get a replacement now.

    Thanks
    Mike Purcell

    www.classicplayfields.com


  5. #5
    Registered
    Join Date
    May 2007
    Location
    CHINA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    FlyGuy007, may I know did you purchase it directly from the factory or it's dealers?
    Is it possible to know how much it cost?



  6. #6
    Registered
    Join Date
    Apr 2007
    Location
    THAILAND
    Posts
    76
    Downloads
    0
    Uploads
    0

    Cool Mpc03-lv

    I had ever contacted step-servo. MPC-03,This price is about RMB 3000 per set. ( 1 usd = 7.6 RMB) --->> 394.74 usd per set. It's not included shipping
    and handling prices. I think it's more expensive.



  7. #7
    Member
    Join Date
    Jun 2006
    Location
    Canada
    Posts
    95
    Downloads
    0
    Uploads
    0

    Default

    I have no idea of the cost of my MPC03 card as it came as a part of my system. However, my case just gets weirder. My MPC03 card is defective for sure but its odd the way it works. The first two computers I tried it in, it would prevent the computers from even POSTing. Just nothing, no video nothing. The 3rd system I tried it in it would boot about 20% of the time. The system I finally put it in boots about 100% of the time, but does not recognize the hard drives about 30% and fails to detect or redetects various cards and controllers in the system at other times. Eventually windows gets so messed up I have to remove the card and restart the system. After a few boots the system detects everything normally and I can reinstall the card and start the whole cycle over. All in all a bad card I believe.

    Certainly its not useabale in a production enviroment but it may be good enough to test the rest of the system

    Mike

    www.classicplayfields.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Laser Controller

Laser Controller