3dprintforums logo

CNCzone Network:  RFQwork :: 3Dprintforums :: Welderzone :: Google+ :: Our Facebook :: Twitter :: SiteMap



Results 1 to 3 of 3

Thread: cnc laser machine parameters

  1. #1
    Registered
    Join Date
    Jan 2007
    Location
    kuwait
    Posts
    83
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    cnc laser machine parameters

    this is loyed . can any person help me to get the right parameters for cutting mild steel 3 mm thickness, as i find melting of mild steel while i cut this one

    i am using cnc laser multicam 300 watts machine
    and using rofin sc* 30 model laser tube
    also use oxygen to cut this

    Similar Threads:


  2. #2
    Not being totally familiar with your equipment, I can only recommend the following:

    Power @ 300W
    Speed to 35-50ipm
    Ox pressure to 20-22psi
    3.75" fl lense
    .020"-.040" diamter gas nozzle orifice.
    Set focus just below surface of the material.



  3. #3
    Registered
    Join Date
    Jan 2007
    Location
    kuwait
    Posts
    83
    Downloads
    0
    Uploads
    0
    Rep Power
    8

    acrylic cuting problem

    to laser pro

    i had a better result when i cut acrylic,but few days before i found some some crack as laser supplie fire for few milli second whille i cut acrylic 6 mm thick sheet,even though it s better few crack are seen in the sides of acrylic sheet. i want some help to get over this problem



Tags for this Thread

Posting Permissions



About CNCzone.com

    We are the largest and most active discussion forum from DIY CNC Machines to the Cad/Cam software to run them. The site is 100% free to join and use, so join today!

Follow us on

Facebook Dribbble RSS Feed