have you tried resetting the machine?
Hi Guys,
i have laser JQ1390 and i wil try to explain my problem and nobody can find what happen
As you can see on the picture, about every 6-8 cm laser engraves bigger letters,it looks like going bigger and bigger and then looks like power going down and engraves nice and smooth ... Light path ok, working table ok, so no idea what going on..
Thank you guys and waiting yours replyas...
Similar Threads:
- Need Help!- PROBLEM WITH ENGRAVING
- Need Help!- software problem engraving problem please help
- Need Help!- Engraving problem
- Need Help!- engraving problem
- Newbie- Chinese Laser Cutting and Engraving Machine TS-6040 60w - Engraving problem
have you tried resetting the machine?
I reinstall software, but did help
Sorry
So when you say light path ok, and working table ok, what did you do to make sure they were both ok? Clean mirrors and lens, check beam alignment? And what about table height, did you check the distance from the nozzle to the work surface at a few different points? Has the machine been altered recently in any way?
If everything mechanical and optical is fine in the path, then that narrows down the problem to perhaps the tube itself. If the beam is changing over time, perhaps you have a water cooling problem such as low flow, temperature out of range etc.... Or maybe the tube or power supply is broken.