Need Help! Cant get my laser to engrave


Results 1 to 4 of 4

Thread: Cant get my laser to engrave

  1. #1
    Registered
    Join Date
    Feb 2018
    Location
    Estonia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Cant get my laser to engrave

    Hi!
    Im new here, so sorry if I post in the wrong section or something.

    now to my problem. We have Bystronics bystar3015 wich we are unable to engrave or mark our details/parts we cut out. For nesting we use Jetcam 2016.
    when i load a dxf file were is detail with a text on number on, the program Jetcam takes it in, nests it to a cutting plan. It shows the detail and the text on a computer that the laser is suppose to textmark/engrave the text on that detail. But when I start to cut the detail in my laser it cuts through this text nut engrave it on???

    Thanx for your attention

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    679
    Downloads
    0
    Uploads
    0

    Default Re: Cant get my laser to engrave

    Bystronic is not an engraver

    CNC lasers, constructions, service


  3. #3
    Registered
    Join Date
    Aug 2016
    Location
    Australia
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Cant get my laser to engrave

    Engraving ID tags etc is a very common process on industrial lasers?



  4. #4
    Registered
    Join Date
    Feb 2018
    Location
    Estonia
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Cant get my laser to engrave

    ???
    There are engraving parameters in mmc.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cant get my laser to engrave
Cant get my laser to engrave