Would Like to switch to RD Works

[tas99]

I have a RedSail X700 that came with AutoLaser software and the machine control software is Laser Engraving Control System-TL-403. I'm not connected directly to the machine so I output a .out file from Laser Works to a thumb drive that I bring to the machine.

I'd like to use RD Works v8 instead of AutoLaser. Does anyone know if I can do this? Will it output a .out file that will work in my machine? Anything I need to know about switching?

Any help would be appreciated.

Tom

Similar Threads:

• Laser tube works on frame drawing and works while moving the head.
• Cam Works TechDB help to tweek to parts non native to Solid Works
• Need Help!- Only Y works correct X don't work Z works one direction only
• Newbie Home switch and Limit, how it works ?
• Newbie Home switch and Limit, how it works ?

[AchillesXue]

Hi, Tom
All you need to do is changing the control panel to Ruida, and remember how those wires are connected with each other, you should be fine.

Achilles
Tripro Technology
www.tripro-tech.com

[tas99]

Thanks for the response.

That solution is a lot more involved than I'd hoped and for now it's not a possibility. I guess there is no simple solution so I'll have to live with AutoLaser.