Need Help! Need some serious help


Results 1 to 4 of 4

Thread: Need some serious help

  1. #1
    Registered
    Join Date
    Sep 2012
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Need some serious help

    I have occasionally read some Laser post in various forums for the past 10 years but never had a laser so was not really serious.

    Now more or less out of the blue I own a laser.

    I bought it off ebay, supposedly in working order but there is no lens or final aperture.

    10000MW 808NM Infra Red DIODE LASER SYSTEM
    OEMLaserSystems

    The laser has a flexible Fiber Optics patch cable but there is nothing terminating it.
    I "believe" the end is just a FC/PC connector.

    What and where do I get a terminator? What do I need? Links to products really appreciated.

    It really appears to be a nicely made unit.

    Thanks, I appreciate the help.
    Ralph



  2. #2
    Registered
    Join Date
    Nov 2010
    Location
    Poland
    Posts
    658
    Downloads
    0
    Uploads
    0

    Default Re: Need some serious help

    This is not laser for direct cutting or engraving so there is no way to add any lens.

    CNC lasers, constructions, service


  3. #3
    Registered
    Join Date
    Sep 2012
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Need some serious help

    re: "This is not laser for cutting or engraving so there is no way to add any lens."

    Thanks for the reply, I will learn the logic of your comment but for now let's just talk about a lens.

    Here is what I have:
    Need some serious help-dscn7644-jpg

    I have a flexible patch cable with FC/PC or SMA905, this is a threaded end. I am picturing a lens holder with the same thread. I will try to determine the thread looks like a fine thread 8mm.

    Do you know a source for such a lens or any lens for that matter, possible I will have to make up a holder.

    We will talk about "is not laser for cutting or engraving" later.

    Ralph



  4. #4
    Registered
    Join Date
    Sep 2012
    Location
    USA
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: Need some serious help

    Here is what I was looking for!!

    I also found them on Edmunds Optics but they cost twice as much on Edmunds.

    If I can actually get things to work I can go to higher quality.

    Thanks for all replies.
    Ralph



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need some serious help
Need some serious help