Need Help! K40 Laser cutter echo


Results 1 to 3 of 3

Thread: K40 Laser cutter echo

  1. #1
    Registered
    Join Date
    Dec 2017
    Location
    Australia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation K40 Laser cutter echo

    Ive been having an issue today with my K40 Laser cutter.

    When cutting, i am getting an echo of my cut slightly off to one side, so if im cutting a circle, it will burn a shadow of a circle just off to the right WHILST it is cutting the circle it was meant to cut, i am dumbfounded at how this is happening. Im thinking something is directing the light to 2 points.... but how?

    Similar Threads:


  2. #2
    Gold Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    5880
    Downloads
    0
    Uploads
    0

    Default Re: K40 Laser cutter echo

    Beam could be reflecting off something like an air assist nozzle if you have one, cracked lenses etc.

    Sent from my SM-T813 using Tapatalk



  3. #3
    Registered
    Join Date
    Aug 2016
    Location
    Australia
    Posts
    79
    Downloads
    0
    Uploads
    0

    Default Re: K40 Laser cutter echo

    Usually it's because your beam isn't centred through the nozzle. Check your mirror alignment along the full path of the beam. Your beam is reflecting off something it shouldn't, usually it's clipping the inside of the nozzle causing a lighter secondary parallel mark



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

K40 Laser cutter echo
K40 Laser cutter echo