Need Help! Question About Max Current for 100 watt laser


Results 1 to 3 of 3

Thread: Question About Max Current for 100 watt laser

  1. #1
    Registered
    Join Date
    Jan 2010
    Location
    USA
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default Question About Max Current for 100 watt laser

    I have a laser engraver on order with a 100 Watt RICI tube and would like to know what the optimum operating current would be. I understand that over driving the tine will cause early failure but what is the optimum current value.

    Thanks,

    Tom

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    69
    Downloads
    0
    Uploads
    0

    Default Re: Question About Max Current for 100 watt laser

    Look at your tube to get the model/series number. Then go to the RECI website and you will be able to look up the specifications for your tube.

    "80 Watt” 700mm x 500mm Ke Hui KH-750 Laser (Similar to the Red Sail)


  3. #3
    Registered
    Join Date
    Feb 2015
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: Question About Max Current for 100 watt laser

    I run mine at a maximum of 24ma. Yours might not be the same though.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Question About Max Current for 100 watt laser
Question About Max Current for 100 watt laser