Need Help! Smoke unusually when cutting


Results 1 to 2 of 2

Thread: Smoke unusually when cutting

  1. #1
    Registered
    Join Date
    Jun 2017
    Location
    Lithuania
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Smoke unusually when cutting

    Dears, I have a problem. I am using Chinese CO2 laser cutting/engraving machine. Suddenly it began to smoke unusually strong when cutting plywood. My cut out details look burnt. Also there are black dusts on the top of cut out details. What is my steps to fix this? Please describe in writing and/or send link from YouTube video if possible.

    Similar Threads:


  2. #2
    Member
    Join Date
    Jan 2008
    Location
    USA
    Posts
    940
    Downloads
    0
    Uploads
    0

    Default Re: Smoke unusually when cutting

    Is your air assist working and pointed into the cut



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Smoke unusually when cutting

Smoke unusually when cutting