Need Help! Please help, AWC708C Lite questions


Results 1 to 2 of 2

Thread: Please help, AWC708C Lite questions

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    Thailand
    Posts
    1
    Downloads
    0
    Uploads
    0

    Question Please help, AWC708C Lite questions

    Hi,

    I'm just upgrade my 50W Chinese CO2 Laser machine electronics to DSP - AWC708C Lite; I got stuck and have some questions:

    1. My belt is 3M (3mm pitch) and have 20 teeths pulley, the motor is nema17 (1.8 degree), my driver set to 1600 micro steps: Could you please help me to calculate the Um per pulse.

    2. The x,y limit switch don't work, (I connect to ELY-, ELX- and GND). will I need to setup anywhere in awc708?, I can't find the menu to manage hardware limit setting.

    3. When I try to test a drwaing file I got "Size beyond border", which I already check that the "Rage" is correct, I don't know why

    Thank you very much for your kind support.

    Tung

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2008
    Location
    USA
    Posts
    258
    Downloads
    0
    Uploads
    0

    Default Re: Please help, AWC708C Lite questions

    I just got one of these and found these also
    1. Use trial and error. Jog a distance and if the real distance is shorter increase the number
    2 go to options, system settings and manufacturing Params. Check hardware limits
    3 means your origin is wrong if your material fits. You can set the origin at any time.
    The manual says a few words about features but doesn't explain when to use something.


    Sent from my iPhone using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Please help, AWC708C Lite questions
Please help, AWC708C Lite questions