Problem Red n Black Chinese 100W laser - Pulse function


Results 1 to 5 of 5

Thread: Red n Black Chinese 100W laser - Pulse function

  1. #1
    Registered
    Join Date
    Jun 2011
    Location
    United Kingdom
    Posts
    9
    Downloads
    0
    Uploads
    0

    Question Red n Black Chinese 100W laser - Pulse function

    Hi,

    On one of my lasers the pulse function has stopped working - I press the button on the control panel - I get the beep - but no pulse fireing from the laser!! Weird!
    Everything else working as normal!

    Need to fix it as it makes routine post cleaning/maintenance alignment pretty impossible!!

    Anybody have any ideas?

    Andy

    Similar Threads:


  2. #2
    Registered abyss's Avatar
    Join Date
    Oct 2015
    Location
    United Kingdom
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Red n Black Chinese 100W laser - Pulse function

    Check if you have no mess-up in control panel (say - extra short time/power etc.)

    Polish @ Éire


  3. #3
    Registered
    Join Date
    Dec 2006
    Location
    USA
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default Re: Red n Black Chinese 100W laser - Pulse function

    Sometimes, though quite infrequent, the firmware in the onboard electronics gets corrupted, so try downloading the firmware again to the laser machine.



  4. #4
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    734
    Downloads
    0
    Uploads
    0

    Default Re: Red n Black Chinese 100W laser - Pulse function

    On mine you can set the pulse power and if it is to low it will not fire



  5. #5
    Registered
    Join Date
    Jun 2011
    Location
    United Kingdom
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: Red n Black Chinese 100W laser - Pulse function

    Hi
    Thanks for the heads up - where is the setting please?
    Andy



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Red n Black Chinese 100W laser - Pulse function
Red n Black Chinese 100W laser - Pulse function