Red n Black Chinese 100W laser - Pulse function

[andygp]

Hi,

On one of my lasers the pulse function has stopped working - I press the button on the control panel - I get the beep - but no pulse fireing from the laser!! Weird!
Everything else working as normal!

Need to fix it as it makes routine post cleaning/maintenance alignment pretty impossible!!

Anybody have any ideas?

Andy

Similar Threads:

• Need Help!- 100w chinese laser issues
• Need Help!- Chinese 100W laser (Red)
• Need Help!- Chinese laser 100W doesn't fire after replacing a Leetro controller
• Need advice on chinese machine (100W) - safest settings
• About Chinese 100W Laser Engraver

[abyss]

Check if you have no mess-up in control panel (say - extra short time/power etc.)

[grawley]

Sometimes, though quite infrequent, the firmware in the onboard electronics gets corrupted, so try downloading the firmware again to the laser machine.

[fixtureman1]

On mine you can set the pulse power and if it is to low it will not fire

[andygp]

Hi
Thanks for the heads up - where is the setting please?
Andy