Inexpensive rotary attachment for Thunderlaser Nova 35?

[AlanC]

I would like to experiment with a rotary attachment on the Nova 35, but $450-$500 for the rotary is more than I'm comfortable with spending for one at the moment. Does anyone know if the less expensive chuck style rotary attachments will work on the Nova 35? I've seen some priced in the range of $180-$190 for Chinese lasers, but I'm not sure if they are compatible with the Thunderlaser.

Thanks.

Similar Threads:

• Need Help!- Thunderlaser Mars 90 vs Nova 35
• Help on the rotary attachment
• Chuck Type Rotary Attachment for Epilog Lasers - New and Inexpensive Possibility
• THUNDERLASER VIDEOS ABOUT HOW TO CUT 10MM ACRYLIC AND USING ROTARY AXIS
• THUNDERLASER VIDEOS ABOUT HOW TO SETUP ROTARY AXIS

[AlanC]

Thanks Nolan, I appreciate the response. The good news is that my Nova 35 should be delivered this Friday

I went with the Nova 35 over the Mars 90, so didn't have the budget left for the rotary. I was hoping that I could start with one of the lesser expensive rotary attachments.

Again, thanks for the reply.