Need Help! Chinese Laser 110V 4060 80w Rotary connection help


Results 1 to 2 of 2

Thread: Chinese Laser 110V 4060 80w Rotary connection help

  1. #1
    Registered
    Join Date
    Jul 2016
    Location
    United States
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Chinese Laser 110V 4060 80w Rotary connection help

    So I bought a Chinese laser engraver and the rotary that it came with was crap so I bought another one and the wires are different. I am looking for some help to find the white ends on the connector and any other help would be much appreciated.
    So old plug
    Chinese Laser 110V 4060 80w Rotary connection help-yjj5r85m-jpg Chinese Laser 110V 4060 80w Rotary connection help-tr32eg3m-jpg
    New Rotary
    Chinese Laser 110V 4060 80w Rotary connection help-in686uim-jpgChinese Laser 110V 4060 80w Rotary connection help-bkhwy7dm-jpg

    I basically want to get a white connector and plug the new wires into it so I can plug it into my machine

    here is the board for the machine

    Chinese Laser 110V 4060 80w Rotary connection help-rammo11m-jpg

    Thank you in advance I am pulling my hair out with this project.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Chinese Laser 110V 4060 80w Rotary connection help-yjj5r85m-jpg   Chinese Laser 110V 4060 80w Rotary connection help-tr32eg3m-jpg   Chinese Laser 110V 4060 80w Rotary connection help-in686uim-jpg   Chinese Laser 110V 4060 80w Rotary connection help-bkhwy7dm-jpg  

    Chinese Laser 110V 4060 80w Rotary connection help-rammo11m-jpg  


  2. #2
    Registered
    Join Date
    Nov 2007
    Location
    Canada
    Posts
    70
    Downloads
    0
    Uploads
    0

    Default Re: Chinese Laser 110V 4060 80w Rotary connection help

    your images are far too small to be useful. Please increase size.
    I will hazard a guess that black/red will match up blue/red . I cannot see well enough to be of any good help.

    rule of thumb:
    https://klinikrobot.com/images/stories/vextawiring.jpg

    google out:

    "Stepper motor wiring diagrams" and "how does a stepper motor work"

    If your motor is a servo.. things are slightly different.. This should get you going I think.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Chinese Laser 110V 4060 80w Rotary connection help
Chinese Laser 110V 4060 80w Rotary connection help