Need hep making a call

[mojoreef]

So I am looking at a couple machines (full size laser cutter) and I have a call to make on older vs newer models of the same machine. So if you have the time let me know your opinion.

So on both models all the drivers, controllers, laser tube and such are the same. below if the main differences.

NEW MODEL:

> Has a newer Laser head design (German copy I think)
> Swiss Steel belt
> Very nice Knife table
> Newer stronger body
> Does not have Auto focus
> Does not come with Honeycomb table

OLD MODEL:
> Has standard Laser head
> Has auto focus
> has the ability to use a honeycomb table.

So for me I cut a lot of small parts and don't want to have to fish them out of the table so the honeycomb is kind of nice their. So then the Autofocus, I dont have it on my current unit so I have no real experience with one. So which model would you choose and is the Autofocus a really must have option. I 95% of my work is with cast acrylic.


thanks in advance

Similar Threads:

• What do you call this?
• Call Subroutine with G91
• Need Help!- how do you call these?
• What do you call it??
• What would you call this?

[epilotdk]

Autofocus is a waste of money and it's usually just in the way.

Swiss steel belt??

[mojoreef]

Yea its a Polyurethane belt with a steel band molded in it. Apparently Swiss made . So you believe the auto focus is not worth it?

[fixtureman1]

You can always add the honey comb bed later or a pin bed