Anyone using an 80W machine for engraving anodized alumium? - Page 2


Page 2 of 2 FirstFirst 12
Results 13 to 18 of 18

Thread: Anyone using an 80W machine for engraving anodized alumium?

  1. #13
    Registered
    Join Date
    May 2010
    Location
    US
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    Just did quick anodized(black) test on our PR530 laser machine.


    I didn't use high speed but 400mm/s. Power is 11% and scan gap is 0.05



  2. #14
    Registered
    Join Date
    Sep 2016
    Location
    China
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    For engraving anodized alumium ,I recommend fiber laser marking machine.80W co2 laser engraving machine is not a good choice,
    Hope to help you


    Anyone using an 80W machine for engraving anodized alumium?-laser-marking-machine-20w-jpg

    Attached Thumbnails Attached Thumbnails Anyone using an 80W machine for engraving anodized alumium?-laser-marking-machine-20w-jpg  
    A professional laser cutting engraving marking machine manufacturer!


  3. #15
    Registered
    Join Date
    Jun 2014
    Location
    China
    Posts
    527
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    yes,80w machine can engrave anodized aluminum.
    Lower power is suitable for engraving, higher power is suitable for cutting.
    And co2 laser machine not only can engrave anodized aluminum, but also wood, acrylic, glass and so on.
    We made many samples already, you can visit our website and have a look

    Anodized Aluminum - Thunder Laser

    Anyone using an 80W machine for engraving anodized alumium?-anodized-aluminum02-jpgAnyone using an 80W machine for engraving anodized alumium?-anodized-aluminum02-jpgAnyone using an 80W machine for engraving anodized alumium?-wood15-jpgAnyone using an 80W machine for engraving anodized alumium?-acrylic27-jpgAnyone using an 80W machine for engraving anodized alumium?-glass09-jpg

    Attached Thumbnails Attached Thumbnails Anyone using an 80W machine for engraving anodized alumium?-glass09-jpg   Anyone using an 80W machine for engraving anodized alumium?-acrylic27-jpg   Anyone using an 80W machine for engraving anodized alumium?-wood15-jpg   Anyone using an 80W machine for engraving anodized alumium?-anodized-aluminum02-jpg  

    E-mail:nolan@thunderlaser.com facebook:https://www.facebook.com/ThunderLaser
    Facebook Laser Cutter Tech Support: https://www.facebook.com/groups/lasercuttertechsupport


  4. #16
    Registered SoCalPlaneDoc's Avatar
    Join Date
    Mar 2012
    Location
    USA!
    Posts
    113
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    When did CNCZone become a venue for Chinese advertisement?

    Automated Machinery Designer - PCNC1100 Series III upgrade, Graziano Sag 12 Lathe
    Solidworks 2016 (SW Certified), HSMWorks


  5. #17
    Registered SoCalPlaneDoc's Avatar
    Join Date
    Mar 2012
    Location
    USA!
    Posts
    113
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    Quote Originally Posted by speedythinker View Post
    Just did quick anodized(black) test on our PR530 laser machine.


    I didn't use high speed but 400mm/s. Power is 11% and scan gap is 0.05
    nice... who makes the tube? and the power supply?

    Automated Machinery Designer - PCNC1100 Series III upgrade, Graziano Sag 12 Lathe
    Solidworks 2016 (SW Certified), HSMWorks


  6. #18
    Registered
    Join Date
    May 2010
    Location
    US
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: Anyone using an 80W machine for engraving anodized alumium?

    We used SPT 850mm 40W for our PR530 machine. The power supply is our own 40W PWM laser power supply that you can find it in our website LightObject
    Next thing I'm going to do is to do rotary engraving and will post the result it soon



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Anyone using an 80W machine for engraving anodized alumium?
Anyone using an 80W machine for engraving anodized alumium?