Need Help! xy is zeroed out at top right corner


Results 1 to 3 of 3

Thread: xy is zeroed out at top right corner

  1. #1
    Registered
    Join Date
    May 2017
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default xy is zeroed out at top right corner

    I just received my red and black 60w ebay laser today. Everything is set up and working good, except for the fact that 0,0 axis points are in the top right corner. This is also how the software (RDWorks) is set up. Is this how the machines are configured? Is there any way to change it? Thanks for your help! It feels awkward working right to left.

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2015
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: xy is zeroed out at top right corner

    Under the Config menu you will find system settings

    My SH-350 has landed !!!-5-jpg

    You can set the origin and I believe you will need to un-mirror the x axis.



  3. #3
    Registered
    Join Date
    Sep 2005
    Location
    USA
    Posts
    185
    Downloads
    0
    Uploads
    0

    Default Re: xy is zeroed out at top right corner

    Usually the 0,0 Machine Home is set where the Limit Switches are located. You can set the Origin for your work anyplace, like mine is set at Center. I just use the arrow keys to move the head to the center of the work and press Origin on the Key Pad. You can set the work piece Origin to be anyplace.

    LightObject 40 Watt Laser, MakerGear M2 3D printer, 20 Watt Ray Fine Fiber laser... master electrician - Retired.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

xy is zeroed out at top right corner
xy is zeroed out at top right corner