No easy fixes. All needs brain.
Hi everyone,
New to this forum. We use our laser etching machine to brand our chairs. We just received it last month (link here to exact product). I had a whole bunch of Ipe slats (very dense wood) in there right now, and after the initial setup, turned the machine on, completely forgetting to move the table down. The laser knocked all of the Ipe slats out of the way, and the table was making a loud noise when I moved it down, and now the laser won't go all the way down the y-axis. Are there any easy fixes for this, or will I need to call a tech?
Thank you in advance,
Similar Threads:
- Need Help!- Y-axis does not move... as soon the laser fires. but is fine before, or after restart
- Newbie- Y axis doesn't move while all the other axis move...why?
- Need Help!- 50 w Laser with z axis table what distance
- Can I do a absoute linear move on one axis, and a relative a-axis move same time?
- Problem- Laser Head won't move along Y axis...
No easy fixes. All needs brain.
CNC lasers, constructions, service
Check under the table to see if anything fell down and is blocking the path. My guess is if its belt drive up and down the Z axis then perhaps the belt jumped a few cogs. Same for the Y axis. Unless you guys have mechanics on staff that can figure it out, yes call your service tech.
1000x750 Workbee CNC - Mach4 - PMDX USB - Windows 10 Pro