Re: Components in Chinese lasers- what's good, what's bad?
Hello,
Just ask : Do you recommend to buy the mechanical kit like this [url]https://www.aliexpress.com/item/Mechanical-Parts-Set-600mm-900mm-Single-Head-Laser-Kits-Spare-Parts-for-DIY-CO2-Laser-6040/32788814346.html?spm=2114.01010208.3.1.T7fnoQ&ws_ab_test=searchweb0_0,searchweb201602_2_10152_10065_10151_10068_10084_10083_10080_10082_10081_10110_10136_10137_10175_10111_10060_10138_10112_10113_10155_10062_10114_10156_10154_10056_10181_10055_10054_10059_10099_10078_10079_10103_10073_10102_10096_10070_10148_10123_10147_10052_10053_10124_10142_10107_10050_10051-10102,searchweb201603_10,afswitch_1,ppcSwitch_7&btsid=2f31bcab-2773-4cbc-9738-c8a122081032&algo_expid=4796a6e2-c0e2-4044-b9c2-a5732c606068-0&algo_pvid=4796a6e2-c0e2-4044-b9c2-a5732c606068[/url]
Is there any problem with the quality. Then, we can purchase the electronic the good one
Re: Components in Chinese lasers- what's good, what's bad?
Greetings what laser you've bought and with what components?
Re: Components in Chinese lasers- what's good, what's bad?
[QUOTE=BenM2;2035778]SPT 's lower wattage tubes stability and beam profile is ok. But, their higher watt tubes (100w+) are poor.
They're much cheaper than Yongli or Reci. Their higher watt tubes are about double the cost of SPT for good reason.[/QUOTE]
Can a 60-watt SPT tube in a given brand of laser cutter be replaced with a better quality laser tube or do you have to stick with SPT if that's what your laser cutter comes with?
Re: Components in Chinese lasers- what's good, what's bad?
Hello,
Better quality? You think 60-watt SPT tube is not good. Our customers feedback is great.
If want to change inneed, I suggest you change to our red pointer laser tube, it can make co2 laser visible.
Please see the video for red pointer laser tube, it designed for high end market.
[video]https://youtu.be/iX-Bqv2dN-k[/video]
Best Regards
Emily Yan
Email: [email]marketing@laserwd.com[/email]
WhatsApp: +86 134 1951 8253
Re: Components in Chinese lasers- what's good, what's bad?
[QUOTE=SPT-Laser;2037230]Better quality? You think 60-watt SPT tube is not good. Our customers feedback is great.
If want to change inneed, I suggest you change to our red pointer laser tube, it can make co2 laser visible.
Please see the video for red pointer laser tube, it designed for high end market.
Best Regards
Emily Yan
Email: [email]marketing@laserwd.com[/email]
WhatsApp: +86 134 1951 8253[/QUOTE]
Sorry Emily, I could have phrased that better. I was trying to find out if all (say) 60-watt tubes can be swapped out for each other in a particular laser. For example, say that I have a Brand X 60-watt glass tube. Can I replace it out with a Brand Y glass tube or do other components need to be changed as well, like the power supply. Where can more info on your red pointer laser tube be found? I couldn't find it on the SPT web site.
Also, for the group at large, are there standard lengths and diamters for glass tubes in the 40-, 50-, and 60-watt sizes?