Druma 4k Fiber Laser Cutting Parameters

[Seth18]

Hello, my name is Seth and I am new to CNC ZONE. I recently purchased a 4k Linear Fiber Laser from Durma. I cannot find any cutting parameters anywhere to cut various thicknesses of mild steel. Can anyone point me in the right direction or tell me where I can get some to go by? I am trying to cut 3/4" mild steel right now but I need to know how to set it to cut everything from 1/8"-3/4." Any information will help because I have none to even start with. Thank you!!!

Similar Threads:

• Fiber Laser Cutting Machine For Metal Cutting
• Why does fiber Laser Cutting Machine need to configure with the moving cutting head
• New Machine Build- 1000W fiber laser cutting machine of GN Laser
• LIMAC fiber laser cutting machine for stainless steel cutting video

[gweikelaser]

which laser source did they use ? we are more familiar with Chines laser sorce or IPG etc ,
If IPG :
235 mid steel: 0.5-20mm 60-0.7m/min
304 stainless steel: 0.5-15mm 60-0.5m/min
5052 aluminum :0.5-14mm 50-0.5m/min
508 brass:0.5-8mm 40-0.7m/min
004 copper:0.5-6mm 40-0.7m/min

Hope this can help
And if buy fiber machine from G.WEIKE. we can provide free training and set up in your place

Any others feel free to ask me

Best Regards
Lucy
han@wklaser.com

Hello, my name is Seth and I am new to CNC ZONE. I recently purchased a 4k Linear Fiber Laser from Durma. I cannot find any cutting parameters anywhere to cut various thicknesses of mild steel. Can anyone point me in the right direction or tell me where I can get some to go by? I am trying to cut 3/4" mild steel right now but I need to know how to set it to cut everything from 1/8"-3/4." Any information will help because I have none to even start with. Thank you!!!

[Seth18]

IPG is the laser source. Thank you for the help!