Problem UNICH LJX-9060 Chinese Laser Engraver


Results 1 to 3 of 3

Thread: UNICH LJX-9060 Chinese Laser Engraver

  1. #1
    Registered
    Join Date
    Mar 2017
    Posts
    1
    Downloads
    0
    Uploads
    0

    Exclamation UNICH LJX-9060 Chinese Laser Engraver

    Hi everybody,

    I recently bought a chinese laser engraver from UNICH and as soon as I start the water chiller the alarm goes on imediately.
    Everything is connected correctly and the chiller is filled at recomended level.
    I was wondering if someone went through the same problem ?

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2017
    Location
    China
    Posts
    73
    Downloads
    0
    Uploads
    0

    Default Re: UNICH LJX-9060 Chinese Laser Engraver

    I think you can ask help for Unich, they should help you solve this



  3. #3
    Registered
    Join Date
    Mar 2017
    Location
    Norway
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: UNICH LJX-9060 Chinese Laser Engraver

    UNICH company can not help you about the problem?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

UNICH LJX-9060 Chinese Laser Engraver

UNICH LJX-9060 Chinese Laser Engraver